The built-in chronothermostat is a device for regulating the temperature, particularly in domestic environments, according to selected times of the day or week.In a heating system, the timer thermostat allows the programming of both the temperature and the operating hours, and with modern timer thermostats also other functions; such as the control of the boiler ignition, the holiday function, the system fault signal etc. There are different types, built-in, wall-mounted, panel-mounted, GSM, Wi-Fi and wireless, powered by mains or battery and all easily programmable.
Following are some suggested thermostats
Perry 1CRCDS26 MOON series Power supply 3 V - 2x1.5V AA alkalineDIGITAL CHRONOTHERMOSTAT BRIGHT TOUCH SCREEN DISPLAY AND MENU NAVIGATION Flush-mounted installation - h 45 mm
Battery powered
Weekly, Winter/Summer
3 frost protection temperature levels
Input for remote contact
Input for removable temperature probe
Weekly chronothermostat suitable for all heating and/or cooling systems, is equipped with a clear backlit TOUCHSCREEN display to keep under control all its functions in real time.
The flush-mounted chronothermostat is pre-programmed in the factory, therefore, immediately after connection and insertion of the batteries, it is ready for immediate use, displaying the current date and time (automatic solar/legal time change: "EURO") and with a standard temperature/time profile in Winter (heating) mode.
The ease of use through menu navigation is the key feature, in fact, despite the completeness of its functions, it is very easy to use. Its permanent memory already contains 2 winter and 2 summer programs with 3 anti-freeze temperature levels designed to offer maximum comfort, but it only takes a few seconds to change them and choose the desired temperatures throughout the day (even every 30 minutes!) and for every day of the week.
The chronothermostat, by default, regulates the temperature in Differential ON/OFF mode and the hysteresis can be set from 0.2°C to 1.2°C to adapt to the thermal inertia of your specific system; alternatively it is possible to select the modulating Proportional mode with adjustable duration cycles (from 7 to 20 minutes): this system allows to keep the desired temperature more stable, increasing the feeling of comfort for the user and is particularly suitable for systems with high thermal inertia such as, for example, underfloor radiant panels.
The set temperature scale is in Centigrade degrees (Celsius) with the possibility to calibrate the room temperature measurement by setting a correction value (from -3 to 3 °C); by switching to Fahrenheit degrees all the temperature displays are updated according to the new scale.
It is possible to connect a separate removable temperature probe (optional) to the chronothermostat and then set it according to one`s own system requirements: remote, underfloor, external. Particular attention has been paid to energy saving: the temporary or permanent manual forcing with temperature SET independent from the weekly program in progress, the holiday program, the suspension for domestic cleaning, the optional block of the set temperatures (MAX/MIN), the value of the adjustable antifreeze temperature, the control through an external contact (ex. (e.g. optional telephone programmer), avoid wasting energy and save money
Battery-operated 3V built-in thermostat Perry-1CRCDS28
mpcshop.it proposes the new built-in chronothermostats of the NEXT series by Perry.
WHITE LED BACKLIGHTING and OPTIMIZED CONTRAST
The LCD display (4.3" in the wall version) is designed to optimize the display of digits for the perfect reading of information.
The elegant white backlighting makes the information readable in any lighting condition
SHARED MENUNAVIGATION
The menu navigation, common to all products in the NEXT series, allows, with a few simple steps, to manage every aspect of temperature control in a short time and with maximum practicality.
|
Programmable thermostats
