The best electro-supply items, for both domestic and industrial use. Made in Italy, excellent materials, items always available and delivered within 48 hours of ordering. Lowest prices online!
Infrared Wall Movement Detector Ip44 Wall Installation Power Supply 230v 50hz Sensing Distance Max 12m Twilight Threshold Adjustment 0-1000 Lux Sensing Angle 180° Insulation Class Ii Perry 1spsp010
MOTION DETECTOR IP 44
Price MPCshop
Eur. 28,91
Available
743 Pcs Estimated Delivery in 5 working days
All prices are VAT included
Bullet points Perry Perry-1SPSP010
Infrared wall movement detector model 1SPSP010 Perry Head adjustable both horizontally and vertically An adjustable timer allows you to choose how long the light should remain on after activation. Adjustable sensitivity from 3 to 12 m IR MOTION DETECTOR WITH 180° ANGLE
Infrared Wall Movement Detector Ip44 Perry 1spsp010 180gradi Detection Angle
Customers Reviews Perry Perry-1SPSP010
Infrared motion detector IP44 Wall installation Power supply 230V 50Hz Sensing distance max 12m Twilight threshold adjustment 0-1000 Lux Sensing angle 180° Insulation class II Perry-1SPSP010
Motion detectors and presence sensors are tools that increase the energy efficiency of the electrical systems in which they are installed. These devices, in fact, adapt the consumption of electricity to the real needs of lighting. The adjustable twilight threshold allows you to select when natural light is no longer sufficient for the user and therefore artificial light must be switched on. The switch-off delay time adjustment allows you to minimize waste, giving you the ability to set how long the light should stay on in the absence of people in the detection angle. This means switching on the light only when the sunlight is not enough and only for as long as you are present in the room.
Motion detectors are electronic switches controlled by a passive infrared sensor sensitive to heat radiation emitted by moving people. The motion detector activates the connected loads (lamp ignition, fans) when it detects movement in its coverage area. Deactivation takes place with a user-adjustable time delay. An adjustable twilight sensor inhibits the switching on of the lighting according to the ambient brightness. The detectors are used to turn on the lights of: private and public corridors, garages, driveways and entrances of homes, porches, stairways, corridors, bathrooms, etc..
The motion detector is a fully automatic control device for indoor and outdoor security or courtesy lights capable of controlling 1000W of incandescent lamps or 400W of fluorescent lamps. During the night, the passive infrared motion detector turns on the connected lighting system when it detects movement in its coverage area. During the day, the built-in twilight sensor saves electricity by turning off the lights, because by acting on the twilight controller, you determine the level of brightness at which the lighting system should operate An adjustable timer allows you to choose how long the light should remain on after activation.
TECHNICAL FEATURES Wall installation Power supply 230V 50Hz Maximum lighting load Incandescent lamps 1000W Fluorescent lamps 400W - CFL/LED (230V) 8 Sensing angle 180° Rotating angle of the horizontal detection head 70°, vertical 35° Sensing distance max 12 m Control of twilight threshold 0 - 1000 Lux Control of switch-off delay time 5 sec - 12 min Insulation class II Intelligent control of relay "ZERO CROSSING" Dimensions (WxDxH) 65 x 88 x 95 mm
Perry Infrared Wall Motion Detector Perry 1SPSP010
Infrared Wall Movement Detector Ip44 Wall Installation Power Supply 230v 50hz Sensing Distance Max 12m Twilight Threshold Adjustment 0-1000 Lux Sensing Angle 180° Insulation Class Ii Perry 1spsp010
MOTION DETECTOR IP 44
Price MPCshop
Eur. 28,91
Available
743 Pcs Estimated Delivery in 5 working days
All prices are VAT included
Bullet points Perry Perry-1SPSP010
Infrared wall movement detector model 1SPSP010 Perry Head adjustable both horizontally and vertically An adjustable timer allows you to choose how long the light should remain on after activation. Adjustable sensitivity from 3 to 12 m IR MOTION DETECTOR WITH 180° ANGLE
Rilevatore di movimento da parete a raggi infrarossi IP44 Installazione a parete Alimentazione 230V 50Hz Distanza di rilevamento max 12m Regolazione della soglia crepuscolare 0–1000 Lux Angolo di rilevamento 180° Classe di isolamento II Perry-1SPSP010
I rilevatori di movimento e i sensori di presenza sono strumenti che aumentano l’efficienza energetica degli impianti elettrici in cui vengono installati. Questi dispositivi, infatti, adattano il consumo di energia elettrica alle reali necessità d’illuminazione. La soglia crepuscolare impostabile permette di selezionare quando la luce naturale non è più sufficiente per l’utente e quindi deve essere accesa la luce artificiale. La regolazione del ritardo allo spegnimento consente di limitare al massimo gli sprechi, dando la possibilità di impostare per quanto tempo la luce deve rimanere accesa in assenza di persone nell’angolo di rilevamento. Ciò significa accendere la luce solo quando la luce del sole non è sufficiente e solo per il tempo in cui si è presenti nell’ambiente.
I rilevatori di movimento sono interruttori elettronici comandati da un sensore a raggi infrarossi passivi sensibile alle radiazioni di calore emesse dalle persone in movimento. Il rilevatore di movimento attiva le utenze collegate (accensione lampada, ventilatori) quando rileva un movimento nella sua area di copertura. La disattivazione avviene con un ritardo di tempo regolabile dall’utente. Un sensore crepuscolare regolabile inibisce l’accensione dell’illuminazione in funzione della luminosità ambientale. I rilevatori trovano applicazione per l’accensione delle luci di: corridoi privati e pubblici, autorimesse, viali di accesso e in ingressi delle abitazioni, porticati, scalinate, corridoi, bagni ecc.
Il rilevatore di movimento è un dispositivo di controllo completamente automatico per luci di sicurezza o cortesia interne ed esterne in grado di controllare un'illuminazione di 1000W con lampade a incandescenza o di 400W con lampade a fluorescenza. Durante la notte il rilevatore di movimento a raggi infrarossi passivi accende l'impianto di illuminazione collegato quando rileva un movimento nella sua area di copertura. Durante il giorno il sensore crepuscolare incorporato consente di risparmiare energia elettrica disattivando le luci, infatti, agendo sul regolatore del crepuscolare , si determina il livello di luminosità al quale l'impianto di illuminazione deve entrare in funzione Un timer regolabile consente di scegliere per quanto tempo la luce deve rimanere accesa dopo l'attivazione.
CARATTERISTICHE TECNICHE Installazione a parete Alimentazione 230V 50Hz Carico massimo di illuminazione Lampade incandescenza 1000W Lampade fluorescenti 400W - CFL/LED (230V) 8 Angolo di rilevamento 180° Angolo di rotazione della testa di rilevazione orizzontale 70°, verticale 35° Distanza di rilevamento max 12 m Regolazione della soglia crepuscolare 0 – 1000 Lux Regolazione del ritardo alla spegnimento 5 sec – 12 min Classe di isolamento II Pilotaggio intelligente del relè "ZERO CROSSING" Dimensioni (LxPxH) 65 x 88 x 95 mm
Perry Infrared Wall Motion Detector Perry 1SPSP010
Wall Movement Detector Zero Series Model 1spsp044b Perry Protection Class Ip44 Detection Angle Up To 220° Brightness Adjustment From 5 To 1000 Lux Warm-up Time At First Power On Or After Blackout Approx. 40\"
Wall Mounted Motion Detector Zero Series Model 1spsp054b Perry Protection Class Ip54 Detection Angle Up To 220° Brightness Adjustment From 5 To 1000 Lux Operating Temperature From -20c To _40c Motion Detector With Broken Beams
Cube Infrared Wall Movement Detector White Ip54 Sensing Distance Max 10m Sensing Distance Min. 40 Cm Power Supply 230v 50hz Sensing Angle 140 Degrees Sensitivity Adjustable From 0.4 To 10 m Perry 1spsp003b
Cube Infrared Wall Movement Detector Anthracite Colour Ip54 Sensing Distance Max 10m Sensing Distance Min 40 Cm Power Supply 230v 50hz Sensing Angle 140 Degrees Sensitivity Adjustable From 0.4 To 10m Perry 1spsp003a
Wall Movement Detector Zero Series Model 1spsp044b Perry Protection Class Ip44 Detection Angle Up To 220° Brightness Adjustment From 5 To 1000 Lux Warm-up Time At First Power On Or After Blackout Approx. 40\"
Wall Mounted Motion Detector Zero Series Model 1spsp054b Perry Protection Class Ip54 Detection Angle Up To 220° Brightness Adjustment From 5 To 1000 Lux Operating Temperature From -20c To _40c Motion Detector With Broken Beams
Cube Infrared Wall Movement Detector White Ip54 Sensing Distance Max 10m Sensing Distance Min. 40 Cm Power Supply 230v 50hz Sensing Angle 140 Degrees Sensitivity Adjustable From 0.4 To 10 m Perry 1spsp003b
Cube Infrared Wall Movement Detector Anthracite Colour Ip54 Sensing Distance Max 10m Sensing Distance Min 40 Cm Power Supply 230v 50hz Sensing Angle 140 Degrees Sensitivity Adjustable From 0.4 To 10m Perry 1spsp003a
Perry-1SPSP010Perry Perry Wall Motion Detector Infrared Wall Movement Detector Ip44 Wall Installation Power Supply 230v 50hz Sensing Distance Max 12m Twilight Threshold Adjustment 0-1000 Lux Sensing Angle 180° Insulation Class Ii Perry 1spsp010 white
MPCSHOP.IT is part of
Circuito Mpc Shop | M.P.C. Musso Personal Computer srl - All rights reserved, The reproduction even partial is forbidden| VAT IT 11811400156 |
Html Site Map Mpcshop |
For information and phone orders: +39 0221117815 | Monday-Friday | 9.00 AM - 1.00PM/2.00PM - 6.00PM GMYT +1 | Fax +39 02700520906 |
ALL OUR SHOPS
Motion detectors
Infrared wall movement detector model 1SPSP010 Perry
